LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Sun Visor >> Removal

Sun Visor: Removal

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. (Only model with vanity mirror light) Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the sun visor assembly.
    1. Remove the cap - sun visor, and then remove the screws.
    2. Disconnect the connector. (Only model with vanity mirror light)
    3. Disconnect the connector and remove the sun visor assembly.
  3. Remove the hook - sun visor.
    1. Press both sides using a flat tip screwdriver.
    2. Remove the hook - sun visor by pulling it toward you.
      G11583111Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals