LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Room Light >> Removal

Room Light: Removal

NOTE: Do not remove the room light if removing the bulb only.
  1. Disconnect the ground cable from battery. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the light assembly - room.
    CAUTION: When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
    1. Release the claws and remove the lens.
    2. Remove the screws.
      G06653389Courtesy of SUBARU OF AMERICA, INC.
    3. Disconnect the connector and remove the light assembly - room and the room light bulb.
      CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
scientia non olet · About LEMON Manuals