Parking Brake Harness

Install the electronic parking brake harness.
Tightening torque:

Harness clamp: 18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the fuel tank protector.
NOTE: Use a new self-locking nut (a).

Tightening torque:

T1: 9 N.m (0.9 kgf-m, 6.6 ft-lb)

T2: 18 N.m (1.8 kgf-m, 13.3 ft-lb)

Fig 1: Fuel Tank Protector, Nuts And Bolts (With Torque Specification)
Courtesy of SUBARU OF AMERICA, INC.
Install the rear seat cushion assembly. Refer to SEATS>REAR SEAT>INSTALLATION .
Install the console box assembly. Refer to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
Connect the ground terminal to battery sensor. Refer to NOTE>NOTE>BATTERY .
Install the rear wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)