Seat Heater Unit (Rear)

CHECK THE SEAT HEATER UNIT .

Disconnect the seat heater unit connector, and check the continuity between terminals of connector.

Seat cushion

Courtesy of SUBARU OF AMERICA, INC.

Backrest

Courtesy of SUBARU OF AMERICA, INC.

Connector and terminal

Seat cushion:

LH side: No. 3 - No. 2:

RH side: No. 5 - No. 4:

Backrest LH:

No. 1 - No. 2:

Backrest RH:

No. 1 - No. 2:

Inspection conditions	Part	Standard
Heater temperature 20°C (68°F)	Seat cushion	Approx. 4.44 Ω
Heater temperature 20°C (68°F)	Backrest	Approx. 6.78 Ω

Is there continuity between the terminals?

Yes : The seat heater unit is normal. Check the seat heater switch. Ref. to SEATS>SEAT HEATER SYSTEM>INSPECTION>CHECK SEAT HEATER SWITCH INDICATOR (REAR) .

No : If no continuity exists, replace the pad assembly.