LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Touring >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Rear Gate Garnish >> Assembly

Rear Gate Garnish: Assembly

  1. Install the switch request (lock). Ref. to SECURITY AND LOCKS>REAR LOCK BUTTON>INSTALLATION .
  2. Install the switch opener rear gate. Ref. to SECURITY AND LOCKS>REAR GATE OPENER BUTTON>INSTALLATION .
  3. Install each protector and ornament. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>REPLACEMENT .
  4. Install the handsfree sensor.
  5. Install the garnish assembly rear gate LWR.
  6. Connect the handsfree sensor connector. (Model with handsfree sensor)
scientia non olet · About LEMON Manuals