Related Lines, More Than 52 Ω And Less Than 62 Ω ((I) Power Unit 2 Can_TCM)
Wiring diagram:
CAN communication system Ref. to WIRING SYSTEM>CAN COMMUNICATION SYSTEM>WIRING DIAGRAM .
- CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS
.
- Disconnect the TCM connector.
- Using a tester, measure the resistance between terminals in TCM connector.
Connector and terminal
(T21) No. 9 - (T21) No. 10 (engine type: FB):
(B67) No. 9 - (B67) No. 10 (engine type: FA):
Is the resistance 400 Ω or more?
Yes : A related line between TCM and main wiring harness is open, or main wiring harness is open at two places or more.
No : Go to 2 .
- CHECK RELATED LINES
.
- Disconnect the central gateway control module connector.
- Using a tester, measure the resistance between the TCM connector and steering sensor connector.
Connector and terminal
(T21) No. 9 - (i88) No. 7 (engine type: FB):
(T21) No. 10 - (i88) No. 8 (engine type: FB):
(B67) No. 9 - (i88) No. 7 (engine type: FA):
(B67) No. 10 - (i88) No. 8 (engine type: FA):
Is the resistance 10 Ω or more?
Yes : Repair or replace the open circuit of TCM related lines.
No : Check DTC of TCM. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .