LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Rear Gate Garnish >> Disassembly

Rear Gate Garnish: Disassembly

  1. Disconnect the handsfree sensor connector. (Model with handsfree sensor)
  2. Remove the screws, and remove the garnish assembly rear gate LWR.
    G13953653Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the screws, and then remove the handsfree sensor.
    G13953654Courtesy of SUBARU OF AMERICA, INC.
  4. Remove each protector and ornament. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>REPLACEMENT .
  5. Remove the switch opener rear gate. Ref. to SECURITY AND LOCKS>REAR GATE OPENER BUTTON>REMOVAL .
  6. Remove the switch request (lock). Ref. to SECURITY AND LOCKS>REAR LOCK BUTTON>REMOVAL .
scientia non olet · About LEMON Manuals