Active Test: List
NOTE:
Some items are not displayed according to destination area or vehicle equipment condition.
| Active test item | Range | Contents | Execution condition |
|---|---|---|---|
| Driver's Seat Heater | HIGH/MID/LOW | Set the driver's seat heater operation. | Ignition switch ON
NOTE:
Engine ON is recommended.
|
| Driver's Seat Ventilation | EX-HIGH/HIGH/MID/LOW | Set the driver's seat ventilation operation.
NOTE:
In normal operation (condition where the Subaru Select Monitor is not used), EX-HIGH mode is not operable unless EX-HI signals arrive from A/C control module.
|
Ignition switch ON
NOTE:
Engine ON is recommended.
|
| Passenger's Seat Heater | HIGH/MID/LOW | Set the passenger's seat heater operation | Ignition switch ON
NOTE:
Engine ON is recommended.
|
| Passenger's Seat Ventilation | EX-HIGH/HIGH/MID/LOW | Set the passenger's seat ventilation operation.
NOTE:
In normal operation (condition where the Subaru Select Monitor is not used), EX-HIGH mode is not operable unless EX-HI signals arrive from A/C control module.
|
Ignition switch ON
NOTE:
Engine ON is recommended.
|