LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Seat Heater Unit >> Front Seat

Front Seat

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • The load sensor of the occupant detection system is fixed to the cushion frame assembly. Never remove the load sensor from the cushion frame assembly. The following parts can be replaced as a single unit.
    • Cushion pad
    • Cushion cover
    • Seat harness
  • When the cushion frame assembly of the passenger's seat is replaced, the seat harness and load sensor are assembled. When replacing the cushion frame assembly, do not touch the load sensor to avoid electrical damage.
NOTE: Seat heater unit is integrated into the seat pad assembly.
  1. Prior to starting work, check the following precautions. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the front seats. Ref. to SEATS>FRONT SEAT>REMOVAL .
  4. Remove the front seat surface. Ref. to SEATS>FRONT SEAT>DISASSEMBLY .
scientia non olet · About LEMON Manuals