LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches And Harness >> Inspection >> Trip Reset Switch

Trip Reset Switch

  1. Measure the resistance between connector terminals.
    G11246174Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Switch OFF 1 MΩ or more
    Switch ON Less than 1 Ω
  2. Replace the switch assembly meter if it is found defective.
scientia non olet · About LEMON Manuals