Related Lines, More Than 52 Ω And Less Than 62 Ω (Body Can_Outer Mirror RH)

Wiring diagram: 

CAN communication system Ref. to WIRING SYSTEM>CAN COMMUNICATION SYSTEM>WIRING DIAGRAM .

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS  .
   1. Disconnect the outer mirror control module RH connector.
   2. Using a tester, measure the resistance between terminals in outer mirror control module RH connector.

      Connector and terminal 

      (Df24) No. 3 - (Df24) No. 4:

      Is the resistance 400 Ω or more?

      Yes  : Related line between outer mirror control module RH and main wiring harness is open, or main wiring harness is open at two places or more.

      No  : Go to  2 .

2. CHECK RELATED LINES  .

   Using a tester, measure the resistance between outer mirror control module RH connector and central gateway control module connector.

   Connector and terminal 

   (Df24) No. 3 - (i88) No. 5:

   (Df24) No. 4 - (i88) No. 6:

   Is the resistance 10 Ω or more?

   Yes  : Repair or replace the open circuit of outer mirror control module RH related lines.

   No  : Check the DTC in door mirror system. Ref. to DOOR MIRROR (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .