LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Legacy Base >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Console Box >> Removal

Console Box: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:
    • Release the shift lock and shift the select lever to the "N" position. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
    • On power seat models, move the front seat all the way forward before disconnecting the ground terminal from the battery sensor.
  2. Remove the grip and boot. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  3. Remove the cover assembly front.
    1. Release the clips, and detach the cover assembly front.
      G13953691Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the harness connector.
  4. Remove the console box assembly.
    1. Remove the cap console and bolts.
    2. Remove the screws and release the clip.
    3. Disconnect the harness connector, and remove the console box assembly.
      • Model without CD deck
        G13953692Courtesy of SUBARU OF AMERICA, INC.
      • Model with CD deck
      G13953693Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals