LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Legacy Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Rear Gate Latch And Actuator Assembly >> Removal

Rear Gate Latch And Actuator Assembly: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>REMOVAL .
  3. Remove the latch and actuator rear gate.
    1. Disconnect the connector.
    2. Remove the bolts, and remove the latch and actuator rear gate.
    G13953449Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals