Related Lines, More Than 52 Ω And Less Than 62 Ω (Body Can_Seat Position Memory)

Wiring diagram: 

CAN communication system Ref. to WIRING SYSTEM>CAN COMMUNICATION SYSTEM>WIRING DIAGRAM .

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK BETWEEN RELATED LINES AND MAIN WIRING HARNESS  .
   1. Disconnect the seat position memory control module connector.
   2. Using a tester, measure the resistance between terminals in seat position memory control module connector.

      Connector and terminal 

      (St42) No. 15 - (St42) No. 16:

      Is the resistance 400 Ω or more?

      Yes  : A related line between seat position memory control module and main wiring harness is open, or main wiring harness is open at two places or more.

      No  : Go to  2 .

2. CHECK RELATED LINES  .

   Using a tester, measure the resistance between seat position memory control module connector and central gateway control module connector.

   Connector and terminal 

   (St42) No. 15 - (i88) No. 6:

   (St42) No. 16 - (i88) No. 5:

   Is the resistance 10 Ω or more?

   Yes  : Repair or replace the open circuit of seat position memory related lines.

   No  : Check DTC of power seat memory system. Ref. to POWER SEAT MEMORY SYSTEM (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .