LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels >> Sealing Cover >> Removal >> Rear Sealing Cover

Rear Sealing Cover

  1. Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Remove the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>REMOVAL>REAR DOOR .
  3. Remove the sealing cover door rear.
    CAUTION:
    • Carefully remove the butyl tape. Excessive force will easily break the cover.
    • Be careful not to allow the butyl tape to contact any trims and seats because the butyl tape, which has a strong adhesive force, is difficult to remove once it adhered.
    • If the sealing cover door rear gets broken, replace it with a new part.
    1. Remove the screw to remove the bracket door rear.
      G13227196Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect connectors.
    3. Carefully remove the butyl tape to remove the sealing cover door rear.
    G13227197Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals