Parking Brake Harness

Install the adapter cord EPB.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the protector tank. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL TANK PROTECTOR>INSTALLATION .
Install the console box. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
Install the rear wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)