Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| Monitor#1 <Timer diagnosis> | |
| Ignition switch | OFF |
| Battery voltage | 10.9 V or more |
| Elapsed time after starting the engine | More than 19 s and Less than 61439 s |
| Monitor#2 <Full count diagnosis> | |
| Ignition switch | OFF |
| Battery voltage | 10.9 V or more |
| Counter in ECM | 4 s or more |
| Monitor#3 <Soaking timer IC setting diagnosis> | |
| Ignition switch | OFF |
| Battery voltage | 10.9 V or more |
| Monitor#4 <Timer diagnosis (during soaking)> | |
| Ignition switch | OFF |
| Battery voltage | 10.9 V or more |
| Monitor#5 <Wake-up diagnosis> | |
| Ignition switch | ON |
| Time in the soaking timer IC | More than 3600s |