Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | 10.9 V or more |
| Sub feedback | In operation |
| Amount of intake air | 10g/s (0.35 oz/s) or more |
| Rear oxygen sensor element impedance | 185Ω; or less |
| Enable conditions at interrupt control are as follows Continuous time when rear oxygen sensor output voltage is less than 0.55V |
4 s or more |
| Air fuel ratio reduced from target air fuel ratio | Equal to Value of Map |
Map
VOLTAGE SPECIFICATIONS - MAP
| Output voltage of rear oxygen sensor (V) | 0 | 0.15 | 0.2 | 0.4 | 0.6 |
|---|---|---|---|---|---|
| Air fuel ratio reduced from target air fuel ratio (%) | 10 | 10 | 4 | 4 | 4 |