Execution Condition
WARNING: This page is about a different variant/trim than selected.
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSTIC METHOD 1
| Secondary parameters | Execution condition | DTC |
|---|---|---|
| Battery voltage | 10.9 V or more | P015A or P015B |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more | |
| Duration of main feedback | 3000 ms or more | |
| Engine speed | 1000rpm or more | |
| Amount of intake air | 15g/s (0.53 oz/s) or more |
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSTIC METHOD 2
| Secondary parameters | Execution condition | DTC |
|---|---|---|
| Battery voltage | 10.9 V or more | P015A and P015B |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more | |
| Duration of main feedback | 3000 ms or more | |
| Engine speed | 1000rpm or more | |
| Amount of intake air | 20g/s (0.71 oz/s) or more |