High-Pressure Fuel Delivery Pipe Assembly
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Be careful not to spill fuel.
- Catch the fuel from the pipes using a container or cloth.
- Disconnect the ground terminal from battery. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
- Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>INTAKE MANIFOLD ASSEMBLY>REMOVAL .
- Remove the fuel pipe insulator No. 1, fuel pipe insulator No. 2 and fuel pipe insulator No.
- Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>FUEL INSULATOR>REMOVAL .
- Remove the flare nut (A) and bolt (B), and then remove the high-pressure fuel delivery pipe assembly.