Reverse Idler Gear: Adjustment
WARNING: This page is about a different car, the 2021 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Select the appropriate reverse shifter lever from the table below, and adjust the clearance A between the reverse idler gear and transmission case wall.
Specification:
6.0 - 7.5 mm (0.236 - 0.295 in)
Reverse shifter lever Part No. Mark Content 32820AA070 7 Far from case wall 32820AA080 8 Specification 32820AA090 9 Closer to case wall - Select the appropriate adjusting washer from the table below, and adjust the clearance between the reverse idler gear and transmission case wall.
Specification:
0 - 0.5 mm (0 - 0.020 in)
Adjusting washer Part No. Thickness mm (in) 803020151 0.4 (0.016) 803020152 1.1 (0.043) 803020153 1.5 (0.059) 803020154 1.9 (0.075) 803020155 2.3 (0.091)