Satellite Safing Sensor: Removal
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
- Turn the ignition switch to OFF.
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY
.NOTE: For the hybrid model, disconnect the battery negative terminal.
- Remove the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>REMOVAL .
- Remove the satellite safing sensor.
- Remove the clip, and remove the cover - satellite safing.
- Remove the bolts and then remove the satellite safing sensor. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>FRONT SUB SENSOR AND SATELLITE SAFING SENSOR .