Front Sub Sensor: Removal
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
- Turn the ignition switch to OFF.
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY
.NOTE: For the hybrid model, disconnect the battery negative terminal.
- Remove the front sub sensor.
- Remove the clips and remove the air intake duct. (When removing the sensor RH)
- Remove the bolt, and then detach the front sub sensor.
- Disconnect the connector of front sub sensor. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>FRONT SUB SENSOR AND SATELLITE SAFING SENSOR .
- Remove the clips and remove the air intake duct. (When removing the sensor RH)