Diagnostic Related Information

WARNING: This page is about a different variant/trim than selected.

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, enter vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select [P-HEV Hybrid Powertrain Control].
On [Select Function] screen, select [Work Support].
On [Work Support] screen, select [Diag. Info].
Check and record [Diag. Info].
Using the Subaru Select Monitor, perform the clear memory of [P-HEV Drive Motor]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
Turn the ignition to OFF.