DTC B1503: Meter Control Module Can Register Stuck

DTC detecting condition:

CAN controller failure in combination meter.

Trouble symptom:

Normal operation becomes impossible because the communication with other parts are not established.

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to COMBINATION METER (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION .

Turn the ignition switch to ON.
Read the DTC of [Combination Meter] using the Subaru Select Monitor. Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Is DTC B1502 displayed? (Current malfunction)

Yes: Replace the combination meter. (Defective hardware or software) Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .

No: Replace the combination meter. (Temporarily defective hardware or software) Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .