LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Door Latch & Door Lock Actuator Assembly >> Removal >> Rear

Door Latch & Door Lock Actuator Assembly: Removal: Rear

  1. Raise the glass assembly - rear door to the top position.
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  3. Remove the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>REMOVAL>REAR DOOR .
  4. Remove the sealing cover - rear door. Ref. to EXTERIOR BODY PANELS>SEALING COVER>REMOVAL>REAR SEALING COVER .
  5. Remove the latch and actuator assembly - rear.
    1. Disconnect the connector.
    2. Remove the TORX® bolts, and remove the latch & actuator assembly - rear.

      Preparation tool: 

      TORX® T30

    G11246311Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals