LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Telematics System (Diagnostics) >> Diagnostics With Phenomenon >> Inspection >> RBC Does Not Operate

RBC Does Not Operate

Probable cause: 

No contract agreement, out of service area, server side malfunction, DCM malfunction, antenna malfunction, smartphone malfunction

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION .
  1. CHECK THE SUBSCRIPTION STATUS  .
    1. Turn the ignition switch to ON.
    2. Using the Subaru Select Monitor, check the following items in the [Data Monitor] of [Telematics]. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DATA MONITOR .
    • Remote Battery Charging Timer Active

    Is the data [TRUE]?

    Yes:  Go to  2.

    No:  The user does not have a service subscription; therefore, it is not a failure.

  2. CHECK DTCS  .

    Read the following DTCs using Subaru Select Monitor. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) . Ref. to MULTI-FUNCTION DISPLAY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) . Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

    • Telematics
    • Multi-Function Display
    • Plug-in Battery Charger

    Are any DTCs displayed?

    Yes:  Perform the diagnosis for the displayed DTCs. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST . Ref. to MULTI-FUNCTION DISPLAY (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST . Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .

    No:  Go to  3.

  3. CHECK THE COMMUNICATION ENVIRONMENT OF THE USER'S SMARTPHONE  .

    Check that the user's smartphone can be connected to the Internet.

    Can it be connected to the Internet?

    Yes:  Go to  4.

    No:  The user's smartphone or the Internet environment has a problem.

  4. CHECK RBC FUNCTIONS  .

    Check that RBC can be operated by the smartphone.

    Does it operate?

    Yes:  Currently no failure is found. If the RBC did not operate, the user's Internet environment (radio waves, etc.) possibly had a problem.

    No:  Go to  5.

  5. CHECK THE CURRENT RECEIVED SIGNAL STRENGTH (CHECK THE DATA MONITOR)  .

    Using the Subaru Select Monitor, check the following items in the [Data Monitor] of [Telematics]. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>DATA MONITOR .

    • Signal Strength

    Is the data 26% or more?

    Yes:  Go to  6.

    No:  Check the telematics antenna.

  6. CHECK STARLINK SERVER  .

    Verify that there was no server outage that coincides with the day/time the customer reported that the issue occurred. (Refer to STARLINK Server Maintenance/Down Report under Reports and Starlink section in Subarunet.)

    Was there server outage that coincides with the day/time when the issue occurred?

    Yes:  Currently no failure is found. When the user had a problem, there was a failure with Starlink Server.

    No:  If no outage exists for that time frame, it is possible that there was environmental interference (radio waves, etc.) when the user performed the operation. No further actions are recommended.

scientia non olet · About LEMON Manuals