LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> SUBARU Eyesight System (Driver Assist) (Diagnostics) (Except For HEV) >> Diagnostics With Phenomenon >> Inspection >> Cruise Control Is Not Released After Shifting The Shifting Lever To The Neutral Position

Cruise Control Is Not Released After Shifting The Shifting Lever To The Neutral Position

  1. PERFORM REAL TIME DIAGNOSIS  .

    Check the input signal of cruise control system. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>REAL-TIME DIAGNOSIS .

    Is the check result OK?

    Yes:  The circuit has returned to a normal condition at this time.

    NOTE: In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.

    No:  Go to  2.

  2. CHECK NEUTRAL POSITION SWITCH  .

    Check the neutral position switch. Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>12 . Ref. to EYESIGHT (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC PROCEDURE WITH ECU CANCEL CODE>62 .

    Is the check result OK?

    Yes:  Replace the ECM. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>ENGINE CONTROL MODULE (ECM)>REMOVAL .

    No:  Repair or replace the faulty portion according to the inspection result.