Check Electronic Parking Brake Operation Indicator Light
Apply battery voltage between the connector terminals to check the lighting condition of the indicator light and illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
Incorrect polarity connection may cause LED damage inside the switch.
- indicator light
| Terminal No. | Inspection conditions | Specification |
|---|---|---|
| 6 (+) - 10 | (-) Apply battery voltage. | Light ON |
- Illumination light
| Terminal No. | Inspection conditions | Specification |
|---|---|---|
| 7 (+) - 9 (-) | Apply battery voltage. | Light ON |