Parking Brake Harness
- Install the electronic parking brake harness.
Tightening torque:
Harness clamp: 18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the fuel tank protector. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO(HEV))>FUEL TANK PROTECTOR>INSTALLATION .
- Install the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION .
- Install the console box assembly.
Tightening torque:
6.5 N.m (0.7 kgf-m, 4.8 ft-lb)
- Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY
.NOTE: After connecting the battery ground terminal, place the select lever in the "P" position.
- Install the rear wheels.
Tightening torque:
120 N.m (12.2 kgf-m, 88.5 ft-lb)