Front Grille: Replacement: Ornament
- Press the ornament from the back of front grille assembly, and remove the ornament.CAUTION:
- Be careful not to damage the surface of front grille assembly during operation.
- Do not reuse the ornament.
- Remove the double-sided tape remaining on the front grille assembly side, then clean the adhesive surface.CAUTION: If even a slight amount of double-sided tape remains on the adhesive surface, it may lead to improper adhesion.
- Degrease the mounting surface of ornament with appropriate cleaning solvent or alcohol.
- Apply primer to the ornament mounting surfaces of the front grille assembly.
Preparation items:
Primer: 3M K-520, K-500 or equivalent
- Install the ornament.CAUTION: Affix so that there should be no gap between front grille assembly and ornament.