LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Limited >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Eyesight System >> Switches and Harness >> Installation >> Pre-Collision Brake Off & Lane Departure Warning Off Switch

Pre-Collision Brake Off & Lane Departure Warning Off Switch

  1. Install the pre-collision brake OFF & lane departure warning OFF switch.
    NOTE: Align the positioning pin of connector clip to the positioning hole of stereo camera cover assembly.
  2. Install the stereo camera cover assembly. Ref. to EyeSight>STEREO CAMERA>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals