Pre-Collision Brake Off Switch And Lane Departure Warning Off Switch: Harness
- Check the continuity between the connector terminals.
Preparation tool: Circuit tester
- Pre-collision brake OFF switch
Terminal No. Inspection conditions Standard A10 - B3
A13 - B5Always Less than 1 Ω - Lane departure warning OFF switch
Terminal No. Inspection conditions Standard A9 - B4
A13 - B5Always Less than 1 Ω - Illumination
Terminal No. Inspection conditions Standard A8 - B1
A12 - B2Always Less than 1 Ω
- Pre-collision brake OFF switch
- Replace the stereo camera cover assembly if faulty is found in the inspection.