CVTF Cooler (Air Cooling): Installation

Install the nuts securing the CVTF cooler (air cool) in the numerical order shown in the figure.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 1: CVTF Cooler (Air Cool) Nuts Tightening Sequence
Courtesy of SUBARU OF AMERICA, INC.
Install a new CVTF cooler (air cool) inlet hose and a new CVTF cooler (air cool) outlet hose.
Install the bumper face - front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>INSTALLATION .
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .