Diagnostic Related Information
- On [Start] screen, select [Diagnosis].
- On [Vehicle selection] screen, enter vehicle information and select [OK].
- On [Main Menu] screen, select [Each System].
- On [Select System] screen, select [P-HEV Hybrid Powertrain Control].
- On [Select Function] screen, select [Work Support].
- On [Work Support] screen, select [Diag. Info].
- Check and record [Diag. Info].
- Using the Subaru Select Monitor, perform the clear memory of [P-HEV Drive Motor]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Turn the ignition to OFF.