Malfunction Description
This indicates that large current flew to the generator converter. The following cases are assumed to be causes of this symptom.
| Part |
Main trouble contents |
| Transmission assembly |
- Short or open circuit of generator coil
- Malfunction inside generator (damages caused by iron powder and foreign matter)
|
| Resolver |
Open or short circuit of Generator resolver |
| Inverter |
- Inverter inner circuit malfunction
- Malfunction of control module that controls inverter
- Inverter controlling sensor malfunction (current sensor, voltage sensor (VH and VL), etc.)
|
| Cooling System |
- Malfunction of Inverter water pump
- Leakage of coolant
- Freezing of coolant
- Clogging in coolant passage
|