LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> HVAC System (Heater, Ventilator And A/C) (HEV) >> FRESH/RECIRC Door Actuator >> Removal

FRESH/RECIRC Door Actuator: Removal

  1. Disconnect the ground terminal from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pocket assembly and the back panel - pocket. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL .
  3. Remove the heat pump control module. Ref. to AIR CONDITIONER (HEV)>CONTROL UNIT>REMOVAL .
  4. Remove the motor - actuator intake.
    1. Disconnect the connector.
    2. Remove the screws, and remove the motor - actuator intake.
      G11245709Courtesy of SUBARU OF AMERICA, INC.