DTC C1733: Longitudinal G Sensor
WARNING: This page is about a different variant/trim than selected.
DTC detecting condition:
- A fault is detected if the communication status of longitudinal G sensor is abnormal.
- A fault is detected if malfunction judgment is generated by self-diagnosis test of the longitudinal G sensor.
- A fault is detected if the longitudinal G sensor signal is out of normal range.
- A fault is detected if the longitudinal G sensor compensation value is out of normal range.
Trouble symptom:
- ABS does not operate.
- VDC does not operate.
- Hill start assist does not operate.
- EyeSight does not operate. (Models with EyeSight)
NOTE:
For the diagnostic procedure, refer to "DTC C1732: LATERAL G SENSOR". Ref. to BRAKE CONTROL (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC C1732: LATERAL G SENSOR .