LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (Except For HEV)) >> High Pressure Fuel Delivery Pipe >> Removal >> High-Pressure Fuel Delivery Pipe

High-Pressure Fuel Delivery Pipe

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the clip from the air intake boot, and loosen the clamp.
    G11252776Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G11252777Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>INTAKE MANIFOLD ASSEMBLY>REMOVAL .
  5. Remove the fuel pipe insulator No. 3 and fuel pipe insulator No. 4. (2.0 L model). Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL INSULATOR>REMOVAL>2.0 L MODEL .
  6. Remove the fuel pipe insulator No. 3. (2.5 L model). Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL INSULATOR>REMOVAL>2.5 L MODEL .
  7. Remove the high-pressure fuel delivery pipes.
    G11252864Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals