LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Starting System & Charging System (Except For HEV)) >> Auto Start Stop OFF Switch >> Installation

Auto Start Stop OFF Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the Auto Start Stop OFF switch.
  2. Install the instrument panel lower cover. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals