DTC P1C00: Battery Monitor Module "A" Performance: Notes
WARNING: This page is about a different variant/trim than selected.
DTC detecting condition:
Detected when two consecutive driving cycles with fault occur.
Trouble symptom:
Auto Start Stop does not operate.
CAUTION:
After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to AUTO START STOP (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
NOTE:
For diagnostic procedure, refer to "DTC P1C00" in "Engine (Diagnostics)". Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.0 (EXCEPT FOR HEV))>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P1C00: BATTERY MONITOR MODULE "A" PERFORMANCE
.