LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Engine Cooling System (Except For HEV)) >> Radiator Fan Relay >> Inspection

Radiator Fan Relay: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that there is no deformation, cracks or other damages.
  2. Check the resistance between terminals. Replace the relay if it is faulty.
    • Main fan relay 1
      G11252918Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      3 - 4 Always 1 MΩ or more
      3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
    • Main fan relay 2
      G11253622Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      3 - 4 Always Less than 1 Ω
      3 - 5 Always 1 MΩ or more
      3 - 4 Apply battery voltage between terminals 1 and 2. 1 MΩ or more
      3 - 5 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
    • Sub fan relay
      G11252918Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Standard
      3 - 4 Always 1 MΩ or more
      3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
scientia non olet · About LEMON Manuals