Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| <Idle speed diagnosis> | |
| Battery voltage | 10.9 V or more |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more |
| Vehicle speed | 2km/h (1.2MPH) or less |
| Throttle position | Less than 0.37° |
| Integrated value of intake air amount | Less than value of Map1 |
| Elapsed time after gear position change (P ↔ D or N ↔ D) |
2000 ms or more |
| Elapsed time after starting the engine | 2000 ms or more |
| <Final ignition timing diagnosis: Idle diagnosis> | |
| Battery voltage | 10.9 V or more |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more |
| Throttle position | Less than 0.37° |
| Integrated value of intake air amount | Less than value of Map1 |
| Elapsed time after gear position change (P ↔ D or N ↔ D) |
2000 ms or more |
Target retard amount
|
Value of Map2 or less |
|
Value of Map3 or less |
| <Final ignition timing diagnosis: Non-idle diagnosis> | |
| Battery voltage | 10.9 V or more |
| Barometric pressure | 75.1 kPa (563 mmHg, 22.2 inHg) or more |
| Integrated value of intake air amount | Less than value of Map4 |
| Retard amount | 6.5°CA or more | |
TEMPERATURE SPECIFICATIONS - MAP 1
| Engine coolant temperature at first engine start (°C (°F)) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
|---|---|---|---|---|---|---|---|---|
| Integrated value of intake air amount (g (oz)) | 1000 (35.26) | 961 (33.9) | 923 (32.54) | 884 (31.18) | 845 (29.82) | 807 (28.46) | 768 (27.1) | 730 (25.74) |
TEMPERATURE SPECIFICATIONS
| Engine coolant temperature at first engine start (°C (°F)) | 40 (104) | 50 (122) | 60 (140) | 70 (158) | 80 (176) | 90 (194) | 100 (212) | 110 (230) |
|---|---|---|---|---|---|---|---|---|
| Integrated value of intake air amount (g (oz)) | 691 (24.38) | 623 (21.96) | 554 (19.54) | 485 (17.12) | 417 (14.7) | 348 (12.28) | 279 (9.85) | 211 (7.43) |
TEMPERATURE SPECIFICATIONS - MAP 2
| Engine coolant temperature (°C (°F)) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
|---|---|---|---|---|---|---|---|---|
| Target retard amount in CSERS (°CA) | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 |
TEMPERATURE SPECIFICATIONS
| Engine coolant temperature (°C (°F)) | 40 (104) | 50 (122) | 60 (140) | 70 (158) | 80 (176) | 90 (194) | 100 (212) | 110 (230) |
|---|---|---|---|---|---|---|---|---|
| Target retard amount in CSERS (°CA) | 9.5 | 9.0 | 4.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
TEMPERATURE SPECIFICATIONS - MAP 3
| Engine coolant temperature (°C (°F)) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
|---|---|---|---|---|---|---|---|---|
| Target retard amount in CSERS (°CA) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
TEMPERATURE SPECIFICATIONS
| Engine coolant temperature (°C (°F)) | 40 (104) | 50 (122) | 60 (140) | 70 (158) | 80 (176) | 90 (194) | 100 (212) | 110 (230) |
|---|---|---|---|---|---|---|---|---|
| Target retard amount in CSERS (°CA) | 0.5 | -1.75 | -3.5 | -3.5 | -3.5 | -3.5 | -3.5 | -3.5 |
TEMPERATURE SPECIFICATIONS - MAP 4
| Engine coolant temperature at first engine start (°C (°F)) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
|---|---|---|---|---|---|---|---|---|
| Integrated value of intake air amount (g (oz)) | 1000 (35.26) | 961 (33.9) | 923 (32.54) | 884 (31.18) | 845 (29.82) | 807 (28.46) | 768 (27.1) | 730 (25.74) |
TEMPERATURE SPECIFICATIONS
| Engine coolant temperature at first engine start (°C (°F)) | 40 (104) | 50 (122) | 60 (140) | 70 (158) | 80 (176) | 90 (194) | 100 (212) | 110 (230) |
|---|---|---|---|---|---|---|---|---|
| Integrated value of intake air amount (g (oz)) | 691 (24.38) | 623 (21.96) | 554 (19.54) | 485 (17.12) | 417 (14.7) | 348 (12.28) | 279 (9.85) | 211 (7.43) |