LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Control System (2.0L (Except For HEV)) (Diagnostics) (2 Of 4)) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0500: Vehicle Speed Sensor "A" Circuit >> Notes

DTC P0500: Vehicle Speed Sensor "A" Circuit: Notes

WARNING: This page is about a different variant/trim than selected.
  1. DTC detecting condition: 

    Immediately at fault recognition

    NOTE: After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.0 (EXCEPT FOR HEV))>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .
  1. CHECK DTC OF VDC  .

    Using the Subaru Select Monitor or a general scan tool, read the DTC of [VDC]. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .

    Is DTC for [VDC] displayed? (Current malfunction)

    Yes:  Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Ref. to BRAKE CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

    No:  Repair the poor contact of ECM connector.