Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATIONS (DIAGNOSTIC METHOD 1)

Malfunction Criteria	Threshold Value
\|Pressure sensor output value of Evaporative Leak Check Module - Intake manifold pressure (absolute pressure) when ignition switch is ON\|	More than 5.1 kPa (37.9 mmHg, 1.5 inHg)

JUDGMENT VALUE SPECIFICATIONS (DIAGNOSTIC METHOD 2)

Malfunction Criteria	Threshold Value
\|Pressure sensor output value of Evaporative Leak Check Module - Intake manifold pressure (absolute pressure)\|	5.1 kPa (37.9 mmHg, 1.5 inHg) or more

Time needed for diagnosis:

Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.