Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters | Execution condition |
|---|---|
| Compensation value status for each cylinder = Integrated time after starting operation* (Refer to Table) * Time is calculated cumulatively |
400time(s) (12.8 s) or more |
| (If the secondary parameters are not satisfied for the compensation value status of each cylinder, the integrated time will not be reset) |
SECONDARY PARAMETERS AND EXECUTION CONDITION - STATUS OF EACH CYLINDER CORRECTION VALUE
| Secondary parameters | Execution condition |
|---|---|
| Main feedback | In operation |
| Engine speed | 1000rpm or more and 4000rpm or less |
The following condition of (A) or (B) is established
|
0.7g/rev (0.02 oz/rev) or more |
| and Amount of intake air |
10g/s (0.35 oz/s) or more |
|
0.6g/rev (0.02 oz/rev) or more |
| and Amount of intake air |
25 g/s (0.88 oz/s) or more |