Diagnostic Method 1
WARNING: This page is about a different variant/trim than selected.
Detect the malfunction by checking "Cumulative value of time when λ changes from lean → rich" in comparison to "Time during which diagnosis is in progress".
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATIONS
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| (Cumulative value of time when λ changes from lean → rich)/(Time during which diagnosis is in progress) | Less than 0.3 | P014C |
| Average value of time necessary for A to inverse the air fuel ratio to Lean → Rich → Lean | More than 5 ms |
JUDGMENT VALUE SPECIFICATIONS
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| (Cumulative value of time when λ changes from lean → rich)/(Time during which diagnosis is in progress) | More than 0.7 | P014D |
| Average value of time necessary for A to inverse the air fuel ratio to Rich → Lean → Rich | More than 20 ms |
Time needed for diagnosis: 90 s
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.