Execution Condition
WARNING: This page is about a different variant/trim than selected.
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 1-1, 5 AND 7
| Secondary parameters | Execution condition |
|---|---|
| ECM initialization | Execution |
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 1-2, 2, 4 AND 8
| Secondary parameters | Execution condition |
|---|---|
| None |
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 3
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | 6.2V or more |
| Electronic throttle control MOSFET | ON |
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 6
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | 6V or more |
| Motor stop signal from ECM | ON |
SECONDARY PARAMETERS AND EXECUTION CONDITION - DIAGNOSIS 9
| Secondary parameters | Execution condition |
|---|---|
| Time elapsed after engine start | 1 s or more |