Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary parameters |
Execution condition |
| Battery voltage |
10.9 V or more |
| Barometric pressure |
75.1 kPa (563 mmHg, 22.2 inHg) or more |
| Cumulative value of purge gas amount calculated from engine start |
20g (0.71 oz) or more |
| (Duration of purge duty ratio = 0% |
4000 ms or more |
| Purge duty ratio from above) |
Not equal to 0% |
| Ambient temperature |
More than -25°C (-13°F) |
| Time when the switching valve in the leak check valve assembly is closed |
Less than 20000 ms |