LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (HVAC System (Heater, Ventilator And A/C) (Except For HEV)) >> Sunload Sensor (Auto A/C Model) >> Installation

Sunload Sensor (Auto A/C Model): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the sunload sensor.
  2. Install the grille - front defroster.
  3. Install the multi-function display. Ref. to INSTRUMENTATION/DRIVER INFO>MULTI-FUNCTION DISPLAY (MFD)>INSTALLATION .
  4. Connect the ground terminal to battery sensor, Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals